Built-in GPS flasher with a short-circuit detection
Model Name: KIS-400G(Identification NO. 22568218)
Configuration: Two-way flasher + distributor
Distribution box
| Classification | Specifications |
|---|---|
| Size(mm) | 400mm X 400mm X 2000mm |
| Material | ABS Synthetic resin |
| SMPS | 12V/3A |
| LED | 6 bulbs LED 4 pieces / RGB LED 1 piece |
| Structure | Upper area (Ventilation & antenna), Main Unit (front and rear configuration), Lower Area (support) |
| Ventilation system | Non-powered air-to-air ventilation using Bernoulli’s principle, eco-friendly products |
| Antenna System | Optimized structures that receives radio waves |
| Landscape Production | Upper and lower LED as light production improves nighttime road environment |
| Sided structure (doubledoors) | Back and front arrangement ensures plenty of room |
GPS Flasher (leakage detection)
| Classification | Specifications |
|---|---|
| Size(mm) | 140mm X 230mm X 95mm |
| Material | ABS Synthetic resin |
| Rated voltage | AC220V ±10% , 60Hz |
| Rated output | DC300V ±10%, 10mA |
| Power Consumption | Maximum 500mA |
| Detection Method | Murray loop approach |
| CPU | 1 Chip Microprocessor |
| Current meter | 0~20mA(Analog method) |
| Galvanometer | ±2.5uA (Analog method) |
| Output Control | 10 ~ 300Vdc (Selector switch method) |
| Zeroing | Linearity error±0.25%, Maximum more than 10 turns |
| Detection quarter number | Up to 8 channels of detection |
| Detection effective range | Up to 1KM |
| Detection Error | Within ±2% |
| End Devices | DC Resistance Below 0.1Ω |
